This company does its job just disgusting! On 12/25/2024, I turned to them for grinding and boring the block, polishing the crankshaft, grinding the cylinder head, replacing the valve guides. The receptionist told me to bring the valves to adjust the gap between the valve stem and the guide sleeve. There is such a thing as an exchange and return of an item if it suddenly did not fit. Each valve was in a separate package. Instead of at least opening one of the 16 valves and trying it on, they opened all 16 valves and even splattered the packaging with their oil hands and said other valves were needed. When replacing the valve guides, a huge gap was made between the valve stem and the guide sleeve. The old guides weren't even as broken as the new ones had become. As a result, I was damaged by 372 bel.rub. for 16 valves and 106 bel.rub for valve guide bushings. Of course, they did not admit their mistake. Then the problem arose with the crankshaft. They said that it had only been polished (although I initially asked them to check it) and all the crankshaft necks remained standard size. As a result, I bought connecting rod + STD root liners, started assembling the block, and after assembling the block, I started scrolling the crankshaft manually to make sure everything was fine, but as a result, there was a knock. I got upset and started looking at everything and saw a decent backlash between the connecting rod insert and the crankshaft neck. Again, I had to sort everything out and take the crankshaft to another place. In another place, the crankshaft was measured in my presence and it turned out that it needed to be sanded to fit the repair size. Plus, again, the damage is 200 bel.rub. for the STD liners that I bought and went to the trash and it was in vain to polish 65 bel.rub. Before you go to this company 1000 times, think! You wouldn't even recommend such a company to an enemy! And they have a sign with GERMAN TECHNOLOGY. If this was how they did their job in Germany, then such a company would be closed instantly!
The No. 1 service in Belarus is indicated in the organization's advertising company, but this is far from the CASE. I STRONGLY ADVISE AGAINST contacting! Oh, if only it were possible to leave 0 stars. Not high-quality engine diagnostics and not complete repairs, for which 2000 was initially paid and then 600 for additional diagnostics and alterations. Keeping silent about problems that cannot be fixed in order to retain the client. They do not take responsibility for themselves. And the head of the technical department said: "there is nothing to restore the engine, buy a new one." And this is the official position of the engine repair company. A nightmare!
I was counting on the fact that it was a big organization and I had a lot of experience, but unfortunately they ruined my work!((
I handled the restoration of the candle carving. It's the same price on the phone, but on arrival it's almost three times more expensive, but okay, I think it's just a good job! But the result just shocked me! I insisted on principle that the bushing be made of aluminum, to which they replied we will do it without any problems! When I took it away, I didn't have much time, I took it and left.
And after looking at the house, I was just horrified! The thread was cut with a deviation of two degrees, as well as a metal futorka. Unfortunately, all this cannot be redone! The head is in the trash(((
Where this cantora got such an assessment is unclear, one price is on the phone, another one arrives, "they just didn't count the price of the sleeve for you," it's far to drag the block before acceptance, it would be good to hold the doors with your teeth, they can't install a retainer, and the faces are unfriendly.
Here, on the first of April, fate presented me with a joke in the form of a broken timing roller. Well, in the end, hello to the valves and as follows from this check of the cylinder head. On the advice of experienced motorists, I turned to this company. But I was advised to have a branch in Uruchye. I called and talked. I really liked the person I was talking to. The conversation turned out to be easy with knowledge of the topic and the subject of the conversation. But while I was figuring it out, they told me to collect manatees and they told me that there is a cylinder head repair on Kozlova22 Street, it's the same company. There's nothing to do, I packed up and went. There are no requirements for acceptance and work. Everything was done properly. But the spare part is something. I haven't seen such a divorce on spare parts prices for a long time. I have spare parts without discounts (and they have such a large scale, most likely wholesale discounts somewhere. I think so. ) a quarter cheaper , or even more could buy (and bought). I open the first site I see with him (and before going to them, I reviewed a lot of sites and oriented myself in prices and popular manufacturers, for this repair of the cylinder head) and began to name prices, and he looks at me and cannot explain his (on average more expensive by 50-80 rubles, depending on the manufacturer) prices. It's something with something. I met this in the early 2000s when I was just starting my driving history.
So I would say so. Before contacting them, check the prices of spare parts very well.
Once again, I did not find any reasons for dissatisfaction at work and would put a solid 5, but for spare parts I would not put higher than 2-3. I agree it is necessary to earn money, but the main thing is that the mouth does not crack from a bitten piece.
In short, I put 5 for the work on repairing my cylinder head, but for spare parts, see for yourself.
I brought the exhaust collector for boring, they did it the next day, they called in advance, everything was fast and efficient. I recommend going to them if necessary.
I did a check of valve clearances on the car, the work was done perfectly, I am satisfied with everything. But there was a residue , after work , there was a very unpleasant smell in the cabin , like in an old locksmith , I couldn 't get rid of it for three days .
Excellent service. The review could have started like this, but NO. In the situation of a flat tire on the home -work segment, the maps suggested that there is a tire service here. Yes, it is clear that it is not their profile, but already before entering the box, the master receptionist, apparently, confirmed that there is a tire service, we will do everything. They did it badly! In the process, I noticed that the rubber is directional, to which I received the answer that I see everything and know everything. As a result, the tire was installed incorrectly. Yes, I didn't notice it right away, but when I got to work, and it's literally in the next building from them, well, or in line of sight. Without problems, everything was redone and for free, although the master mechanic at the beginning tried to say that he did everything right (like a fool himself), but not correctly, he even looked at the other wheels himself, and when I asked him to smear the sealant a second time, he received an answer that it was not necessary, to my remark that in in that case, I will come to them for the third time, and this is the time. What is the result? An hour and a half, together with the alteration to one wheel with a normal puncture, is a lot.
What's all this about? The same master, when I arrived, was adjusting the valves of the engine head of someone's car (he said so himself). I sincerely wish that this was NOT your car.
There are probably good specialists there, but I did not encounter them.
A very long time! A week minimum! The greyhound attitude! How many cylinder head heads did I encounter the current for the first time! You have to pay 50% extra for speed. For a long time!!! I do not recommend it! I will not apply anymore!!!
There are no minuses, only pluses, thank you for your fast, high-quality work and, what surprised me, the director himself is adequate, without pathos and, in principle, the entire staff is very friendly.
Excellent workshop
Parking space
I brought the cylinder head for repair , checked for leaks , leveled the plane . Very fast, in principle, not expensive
I recommend
It was nice doing business with good people.
Good luck to you
I gave them to grind the valves, grind my head on the phone, they promised to do it in a day, for a total of 4 days, they said if you want to pay 50% of the cost faster, I don't plan to apply anymore 4 days of downtime on the lift is expensive for me.
I gave the KIA - "badass" engine for repair. They reworked, lapped the valves + replacing the caps, polishing the crankshaft, grinding along the plane + fitting the pistons on the connecting rods. 30.04 gave 08.05 took it away - quickly and efficiently. I recommend.
I equalized the head and the block everything is exactly fine, but when it came to connecting rods, the installation of bushings and their groove, then all sizes were different for all 4 connecting rods, some schoolboy was doing there.
I left it for grinding and checking for tightness in the end, they took out the valve, broke the bolt and wanted another 60p for drilling, I do not recommend katekorichiski!
I called, came to consult, an employee says he is busy at the order desk, do not distract me. I don't quite understand how best to solve my head problem, instead of explaining it to me, they tell me so. Well, okay, let's go to the competitors
I did not pass the inspection due to the backlash in the lever and a bad handbrake, I turned to this situation, the price of the lever was cosmic, but the masters restored the lever to me and saved me most of the money, and the handbrake was adjusted and the suspension was inspected for free. Awesome Well done! I will contact you.
It is difficult to find a worse relationship and service, apparently due to the huge number of posts and work, they do not orient the cost of spare parts in advance, not the time, they put it down and put it down, you dial like an idiot yourself, I highly recommend it . A small small business is our everything, not this here
They fixed it in one place, and broke it in another. Explaining that your car is old. "Anyway, we don't have to keep an eye on it."
See original · Русский
Алексей Иванчук
Level 11 Local Expert
April 3, 2024
Thank you very much, I adjusted the valve clearances, everything is super, along the way I found and solved the problem with the engine. You can immediately see that the company is serious, they know the business. You can safely contact
You can only drive up on a tank, pits, potholes, the bumper is hooked and torn, the snow is not cleaned and the holes are not patched...the prom zone in one word. I have not seen a worse block measurement, they also said it was paid, they did the same job for free at the Malinovka car market. I'm not going here, because I'm impressed by the lack of customer orientation and indifference. 6 people are sitting on 50 squares, it is unclear what they are doing.
I brought the crankshaft for measurement and repair. The receptionist raised his head and pointed his finger at the boxes. Then he said write an application. After that, he says "FREE." How is this at all?
The promise that they will measure and call back by the end of the day has not been fulfilled. They called back the next day and said "take it away, it's not maintainable." The questions were answered reluctantly.
The site indicates that the crankshaft defect of a passenger car is free, but in fact they took 5p and did not even want to show the crankshaft before payment.
Conclusion: "Professionals."
I do not recommend it.