I got here when the rail was being changed nearby and decided to look for a closer convergence. As a result, the service is where they do it once without cash! But because of the departure of the ball bearings, then the rails, I have been coming here for the second year. I can't say about the service station, it was not repaired. I recommend doing a camber-convergence here, also the masters will tell you if something is wrong with the suspension, they check before work, and they did not take the money. They said come when you make the pendant!
I recommend it, very professionally and quickly. Thanks to the specialist, I saved money and time! This is the only place where I was shown and told everything, now only to them. Special thanks to Master Evgeny!
Externally, like other service stations, it is unremarkable. There doesn't seem to be a special mess in the premises. The entrance to the hangars is broken into trash. There is no place for visitors, a couple of chairs in the back room. The receptionist was talkative and sociable. Despite the delay in the delivery of spare parts and the end of working hours, they said they would do it. And they did, and gave the car away. The prices are not bad. In my case, they did everything quickly.
The guys are just great!!!! You will arrive, ask that something is not clear with the car, but they do not refuse, they will look, drive through, and tell you what needs to be done, and of course they will do it. But how!!! It's great and they don't charge much. I advise everyone to look here and make their own cars. Many thanks to the masters.
The masters of their craft tinkered with my grant, changing the valve cover gasket and camber bolts. The prices correspond to the work done in terms of quality, timing and difficulties that the guys had to cope with, I will recommend it to everyone!
Specialist Evgeny, I recommend, it is clear that the person in his place solved the problem that he could not solve with many specialists, so to speak. I will definitely recommend it to my friends!
An excellent station! The guys helped out not only with the repair of the chassis in my golf , but also helped me find new spare parts, which I had great difficulties finding. The car was repaired on time and with proper quality. Thanks a lot guys! Keep it up !
I think it's very good. Because before doing an inspection and conclusions (by the way, he didn't do it to me, because he showed me the problems) he didn't pay anything. But when I do, I'll come back to him.
If not once to collapse and each time it gets worse and worse. The last time the master went smoking more, talked on the phone and with his "colleagues" than he did his job. People have become indifferent to your time. There are also questions about the work done. I won't come here anymore
I would like to express my gratitude to the employees of this service for their competence and quality of service.The reason for contacting this service was increased tire wear along the outer edge, as a result of a violation of the wheel mounting angles (the car had previously been in an accident).Before that, I went to other services with a request to solve the above problem, but I did not receive a proper response due to increased wear of the rubber.The answers were standard:the suspension is normal, the camber is in tolerance.I turned to this service based on reviews and proximity to home.As a result, the master determined that as a result of poor-quality repairs by previous craftsmen after an accident, a lever was installed not from my car (it was shorter by 20mm!!!!)As a result, the angle of the front wheel was shifted 1 degree to the left.No one had even tried to figure out the reason before.I very rarely write reviews and try to do everything in the car myself, if possible, but at that moment I came to a dead end.The guys not only identified, but also eliminated the malfunction by collecting the necessary and geometrically suitable part (lever) for little money.After the work carried out, the collapse came to factory values.The tire wear is gone.The car began to behave more confidently in taxiing.I have already recommended it to my friends and everyone was satisfied with the services of this service.PS: I was very surprised that the master would check the tire pressure before the collapse, as it should be done.Score 5!If it were possible to bet more, I would!
I arrived on a first-come, first-served basis, the wait took about 15 minutes, the collapse was done quickly and efficiently, the price was pleasant, I recommend visiting.
I am very satisfied with the service
Normal guys work. I wanted to change the ABS sensor, check the camber, lifted the car, looked that I brought the wrong spare part, the suspension also needs to be repaired, everything was explained, they did not take money for lifting. Intelligently, adequately, without divorce.
A very professional approach: Before adjusting, the pressure in all wheels is checked, the steering wheel is fixed with a special template, on which a bubble level is set, and not on the "peephole" The equipment is new. It's not for nothing that they have a record for several days in advance. All my questions like what is this figure or what is this indicator were answered competently and intelligibly I recommend to Everyone
The attitude towards customers is not pleasant. As if you're ruining the day by coming to the workers. You want to use the service, leave money, but they are not interested in it. Everything says, you'd better go somewhere else, which I did.
Modern equipment, craftsmen with extensive experience. In principle, that's how I came here - I was a regular customer on another service. I found out that the master now works for himself, why look for something else when there is a proven option?
I came to the collapse…He asked me to make a rear axle. They said that they also needed the front one, allegedly they tweaked something, the numbers did not change, I gave the amount for two axes! Be careful!
They need to calibrate their stand, or change the staff one of two things
So adjusted- a month of torment, a waste of 80p …
I went to a normal service station - everything is smooth!
It's a great station.competent employees.normal prices.they do it quickly and efficiently.I recommend it!I am constantly contacting myself and I am very happy!
Professionalism, politeness, tact, the desire to do the job efficiently and not on the sidelines. There is a relaxation room with a TV and a heater, which is also important)
Thanks a lot to Alexander and Eugene, the guys are great, they know their job and approach work very responsibly!Volkswagen Phaeton car, made a camber-convergence with an air suspension adaptation!I did not hope for a final positive result, since I did not arrive at the first HUNDRED, they do not take it everywhere to make a camber with a pneumatic, and if they did, then there was no desired result at all (to make a camber, you need to lower the stretcher, such a feature of the phaeton, the rear camber bolts turned badly, but the guys did everything!!!Fast, high-quality and not expensive👍👍👍👍👍
The service is at the highest level. The work is done efficiently, accurately and quickly. They give recommendations. They advise. I've been served there a couple of times. I strongly advise you to visit this service.
Once I decided to try to adjust the camber on my car. I don't do it anywhere else after that. Everything is high quality. After opening the box with suspension maintenance and other things, I discuss only this one hundred. Where I'm not afraid to park my car!
Thanks to Alexander for the approach to his work! I came to him in a Bmw e46 on acquaintance. So that you understand, most other stations do mostly only camber, and forget about convergence, they rarely approach the rear axle at all or are afraid to twist the bolts... If you have rear-wheel drive or all-wheel drive, then feel free to come only to Alexander! He inspected the car, cleaned all the bolts, treated them with a cleaner, loaded weights into the cabin (so that everything was according to the regulations, as it turned out, the weight of the car was important), unscrewed all the bolts and nuts, replaced the washers, made convergence and collapse of both axles, set the steering wheel level, and not "by eye". It was interesting to watch his work. We will travel and see, of course, but it was clear that the person not only has experience, but also performed the work with an understanding of all the features of my car. Thanks! I recommend it!
Many thanks to the master! I recommend it!
Recording and reception by time. The ideal approach to the client. Only the necessary recommendations, without "water".
Thank you. So I came here, on recommendation, for the third hundred in a month, with the problem of being sidelined. The specialist studied the two previous printouts and said with confidence that it was not a matter of collapse, they twisted something on the previous two, took money for adjustment, and then kicked at the fact that the rubber curve (NEW) could. Let's go to the test-it pulls. I threw on the devices and yes, everything is in the tolerances. I connected the computer and after about 20 minutes it says it's done. Test drive again and the car goes smoothly. He adequately explained that the problem was with an uncalibrated steering wheel sensor. I took 15 for checking, 25 for the computer. Respect and respect. There would be more such masters.
p.s. I will go to decide what they took money for in previous collapses.
Excellent collapse. Modern equipment. Alexander is a very good and qualified master, always pays attention to all the little things. I checked the pressure in all the wheels and the suspension. I did everything quickly and efficiently. I recommend.
I did, the collapse of the convergence to the service station on 14a Stebeneva Street.
I liked everything!
The master is polite, explained everything, did it well, I will contact you again.
I found a hundred through the maps that are closer to home. I really liked the service station and the attitude towards the client. I came to the collapse, they said exactly what needed to be replaced, I was at the other hundred, they said all sorts of nonsense. I replaced everything, arrived, everything was done quickly and efficiently. They gave recommendations
It was the first time, I found it through a Yandex map. I looked at the reviews and decided to go to them, as it was necessary to correct the collapse-convergence. We checked the pressure in the wheels, which was not done on one camber, put the level on the steering wheel, which was also the first time I saw for all the times of doing camber on other services. We did everything right. I will continue to address them!
For many years, I have been constantly servicing my car with Alexander... Everything is always clear, fast, and professional...and I advise many of his friends, as a good master ...
Now I have opened my station and this is not a little important for a good specialist ...
With which I congratulate you, there is at least a place to leave your feedback 😀😎💪💣
I came with a problem on a Fiat Bravo 2 - the car was moving away. I was very surprised by the attitude to work, I probably saw this for the first time.
First, before setting up the camber, Alexander checked the pressure in all wheels. This has not been done on any service.
Secondly, a thorough study of the car and its features.
Thirdly, the car's factory data on the body and on the vin code were different. Alexander didn't give up on this and was looking for additional data for the car.
As a result: the car stopped moving to the side.
Will I come here again if necessary? Naturally yes :)